Downloads

The Raspberry Pi Pico is a powerful, low-cost board based on the Raspberry Pi RP2040 microcontroller. This build is the reference implementation for GP2040-CE.

The Raspberry Pi Pico W is a powerful, low-cost board based on the Raspberry Pi RP2040 microcontroller.

Another RP2040 board in the Pro Micro form factor, with 2 additional pins for USB data. This build is configured for DIY gamepad mods.

Drop in RP2040 replacement for Pro Micro builds by SplitKB.com.

An RP2040 board in the Pro Micro form factor. This build is a drop-in replacement for the Daemonbite Arcade Encoder.

The Waveshare RP2040-Zero is a small form factor board with castellated pins and USB-C, making this a popular choice for custom built PCBs without the need for SMT assembly.

Open source stickless controller designed by TheTrain.

Open source stickless WASD controller designed by TheTrain.

Arcade encoder board designed by TheTrain using an embedded RP2040, and is the official board of the GP2040-CE project.

Official USB Passthrough Board of the Open Stick project. Updated version of the RP2040 Advanced Breakout Board with USB passthrough included on the board.

Stickless PCB designed by jfedor2 using an embedded RP2040 chip.

Stickless PCB designed by jfedor2 using the Waveshare RP2040-Zero.

Mirrored version of the Flatbox Rev 5 by SkylaHila. Based on the Flatbox Rev 5 byjfedor2.

Stickless PCB designed by jfedor2 and TheTrain using the Waveshare RP2040-Zero.

The GP2040-CE Keyboard Converter Case is designed to be a USB Host Device for the use of a keyboard with the GP2040-CE project.

Configuration for the Granola Summit. PCB and design files can be found here.

Arcade encoder board designed by FeralAI using a Raspberry Pi Pico or pin-equivalent RP2040 board.

Pocket-sized digital controller from RanaLabs.

Arcade encoder board designed and sold by MiSTerAddons using an embedded RP2040 chip.

Arcade encoder board designed and sold by MiSTerAddons using an embedded RP2040 chip.

Reflex Board Open source PCB for SNES Controller replacement PCBs designed and sold by MiSTerAddons using an embedded RP2040 chip.

A reduced-footprint spin off of the RP2040 Advanced Breakout Board designed by TheTrain.

The SGF Bridget MX stickless controller is based on the open-source flatbox rev4 design by jfedor.

A small and portable PCB-as-a-controller designed by GroooveBob using the Waveshare RP-2040-Zero.

Configuration for the Haute42 Series. The Haute42 products are all compatible with the same configuration file. These products include the Haute42 Pad M Series, T Series, G Series, and mini.

Configuration for the Mavercade. These revisions use a Waveshare RP2040-Zero board.

Configuration for the ScrubTier BentoBox v1 and v2 as well as the GGEZStick Keebfighters.

The SGF Faust stickless controller is an all new design from SGF Devices running on the open source GP2040-CE firmware.

Configuration for the Fightboard v3

Configuration for the Fightboard v3 mirrored with directional inputs on the right hand and the action buttons on the left.