Skip to main content

Reactive LEDs Configuration

Purpose: This add-on allows you to setup reactive single color LEDs that are connected to GPIOs. GP2040-CE Configurator - Reactive LEDs

Web Configurator Options​

There are 10 total LEDs that can be configured through web-config. For each LED you have the following options:

LED X -LED GPIO Pin - The GPIO pin that the LED is connected to. -Action - Choose which action will trigger this LED. -Default Mode - Choose the behaviour when this action is not enabled. -Active Mode - Choose the behaviour when this action is enabled.

Hardware​

You will require an LED connected to the GPIO pin and ground.